2017 Sennebogen 821 M E Base

Current Sennebogen M-E-Series 821 M E

Swipe to View More

Year 2017
Make Sennebogen
Model 821 M E
Engine Cummins QSB4.5-C130

Year 2017
Manufacturer Sennebogen
Model Name 821 M E
Trim Name Base
Generic Type (Primary) General
Engine Cummins QSB4.5-C130
Engine Type in-line, 4 cylinder, cooled exhaust gas recirculation, water cooled | Control: integrated ECM automatic idle - stop eco mode
Engine Power 132 HP (94 kW) @2200 rpm
Emissions EPA Tier 4 Final
Injection Pump Type high pressure common-rail
Displacement 4.5 L (272 cu.in.)
Bore 4.21 in (107 mm)
Stroke 4.88 in (124 mm)
Aspiration turbo charged, charge air cooled
Starter 24 V, 4.8 kW
Cooling cool-on-demand, suction-type fan system, side by side | Hydraulic/Water: hydraulic fan drive axial piston pump, reversible fan thermostatically controlled, closed loop system | Charge Air: direct fan drive
Air Filter direct flow filtration system dual stage filter with pre-filter

2017 Sennebogen 821 M E

Diesel-fueled or electric-drive machines from 44,000 lbs. (24,000 kg) to 750,000 lbs. (300,000 kg) with reach options from 30’ (9 m) to 130’ (40 m) including Balance cranes and Green Hybrid models.

All models may be mounted on the full range of platforms including rubber tired or tracked undercarriages, pedestal and stationary mounts, locomotive, gantry.

Features may include:

Clear lines of sight

Open front window and large side windows supplemented by 2-camera system as standard.

Continuous lubrication

Extend component life with no waste, no spill hazards.

Engine

Engine Cummins QSB4.5-C130

Engine Type in-line, 4 cylinder, cooled exhaust gas recirculation, water cooled | Control: integrated ECM automatic idle - stop eco mode

Engine Power 132 HP (94 kW) @2200 rpm

Emissions EPA Tier 4 Final

Injection Pump Type high pressure common-rail

Displacement 4.5 L (272 cu.in.)

Bore 4.21 in (107 mm)

Stroke 4.88 in (124 mm)

Aspiration turbo charged, charge air cooled

Starter 24 V, 4.8 kW

Cooling cool-on-demand, suction-type fan system, side by side | Hydraulic/Water: hydraulic fan drive axial piston pump, reversible fan thermostatically controlled, closed loop system | Charge Air: direct fan drive

Air Filter direct flow filtration system dual stage filter with pre-filter

Drivetrain

Steering joystick steering

Hydraulics

Hydraulic Type LUDV load sensing pilot pressure controlled open center | Filtration: dual filtration system 3 micron (HydroClean)

Maximum Pressure 5,076 psi (350 bar)

Pump Type variable-displacement axial-piston pump

Hydraulic Flow Max: 82 gal (310 l/min)

Brakes

Brake System Type Service: disc brake

Parking Brake Swing Drive: multidisc brake, spring loaded | Undercarriage: multidisc brake spring loaded

Electric

Magneto Rating: 9 kW | Voltage (magnetized): 230 V | Current (cold condition): 39 Amps

Alternator 95 V/Ah

Operational

Drive System Swing System: 1 x axial piston motor driving planetary gearbox, integrated brake vales | Magnet: hydraulic

Drive Control Hydraulic System: open loop | Undercarriage: all-wheel drive, variable displacement motor with dual stage power shift transmission

Operating Speed Slewing: 0-8 rpm | Undercarriage: 1st 0-3.4 mph (0-5.5 km/h) 2nd 0-12.43 mph (0-20 km/h)

Chassis

Chassis Upper Carriage: torsion-free upper frame with continuous bearing-plates for optimal power introduction, precision pivot; excellent design; very low noise emission | Under Carriage: rubber tired MP21E

Swingarm Swing Bearing: internal teeth, sealed ball bearing

Axle Capacity, Front oscillating with hydraulic lock, integrated safety check valves

Axle Capacity, Rear fixed

Lights and Safety

Lighting 2 x cab roof, type halogen 2 x frame upper carriage, type H4

Safety Features UnderCarriage: travel alarm

Wheels & Tires

Tires, Front Specification 8 x 10.00-20 (solid rubber)

Capacities

Fuel Capacity 87 gal (330 L) | Refill: 87 gal (330 L)

Tank Type Hydraulic: 69 gal (260 L)

Weights

Weight, In Running Order 48,060 lb (21,800 kg)

Battery

Battery 2 x 12 V, 150 Ah