2017 Sennebogen 735 E Base

Information

2017 Sennebogen 735 E

Diesel-fueled or electric-drive machines from 44,000 lbs. (24,000 kg) to 750,000 lbs. (300,000 kg) with reach options from 30’ (9 m) to 130’ (40 m) including Balance cranes and Green Hybrid models.

All models may be mounted on the full range of platforms including rubber tired or tracked undercarriages, pedestal and stationary mounts, locomotive, gantry.

Features may include:

More Throughput
  • With its ample power and a stable platform, the 735 is able to pick loads up to 20 t and carry them safely at optimum speeds.
Wide-Stance Stability
  • A 186 kW diesel engine and wide-stance undercarriage lets the 735 cover ground in wood yards at forward and reverse speeds up to 12 mph.
Compact Mobility
  • With all-wheel drive and two-axle steering, SENNEBOGEN pick & carry machines are specially designed to move wood efficiently through narrow lanes at mills and log yards.

Photos

Highlights

  • Stratton, Ontario
  • 2017
  • Sennebogen
  • 735 E Base
  • Cummits QSL 9-C300 Level IV. Direct Injection, turbo charged, charge air cooler, reduced emissions, Eco mode, idle automation, stop automation, fuel pre-warming
  • Upper Carriage: Torsion-resistant box design, precision craftedm steel bushings for boom bearing arrangement. Extremely service-friendly concept, engine intalled in the longitudinal direction | Attachments: Decades of experience, state-of-the-art computer simulation, highest level of stability, Longest service life, large-dimensioned and low-maintenance bearing point, sealed special bearing bushes, precicion-crafted, quick-release cuoupling on the connections - open/close/rotate grapple | Under Carriage: Stable walded construction in box design, type MF37E
  • Approx: 43,900 kg (Basic Machine: 735 M)
  • Available

Specifications

  • 2017
  • Sennebogen
  • 735 E
  • Base
  • General
  • Cummits QSL 9-C300 Level IV. Direct Injection, turbo charged, charge air cooler, reduced emissions, Eco mode, idle automation, stop automation, fuel pre-warming
  • 224 kW / 300 hp at 200 rpm
  • Water-cooled, cooler fan reversal | Uppercarriage: 3-cicruit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
  • Dry filter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
  • Compact, planetary gear with slant axis hydraulic motor, integrated brake valves
  • Load sensing7LUDV hyrdraulic system, hydraulic, pilot-controlled work functions, load limit sensing control | Filtration: High-performance filtration with long change interval
  • Zero-stroke control, on-demand flow-control-the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
  • max. 740 l/min
  • to 350 bar
  • Hydraulic clylinders with high-quality sealing and guide elements, end position damping, sealed bearing points, pipe fracture safety valves for the hoist and stick cylinders
  • Slewing Drive: Spring-loeaded disk brake | Undercarriage: Spring-loaded disk brake
  • Uppercarriage: Central electrical distributor, battery disconnect switch | 24V
  • Undercarriage: All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve and 2-stage power shift transmission planetary axles with integrated steering culinders, service brake in 2-circuit system, automatic central lubrication, steering direction reversal, direction of the travel reversal, protection for travel drive
  • Hydraulic System: Porportional. precision hydraulic activation of work movement, 2 hydraulic servo joysticks for work funtions, supplemental functions, via switches and foot pedals
  • Slewing: 0-7 rmp, variable | Undercarriage: 0-20 km/h, variable
  • Upper Carriage: Torsion-resistant box design, precision craftedm steel bushings for boom bearing arrangement. Extremely service-friendly concept, engine intalled in the longitudinal direction | Attachments: Decades of experience, state-of-the-art computer simulation, highest level of stability, Longest service life, large-dimensioned and low-maintenance bearing point, sealed special bearing bushes, precicion-crafted, quick-release cuoupling on the connections - open/close/rotate grapple | Under Carriage: Stable walded construction in box design, type MF37E
  • Rigid cab height elevation 1 m | Equipment: Sliding door, exellent ergonomics, climate automation, seat heater air suspension comfort, seat, fresh air filter / circulating air filter, joystick steering 12 V / 24 V connections, SECON V2, full protective grating
  • UpperCarriage: Perimeter uppcariage railing | Hydraulic System: Gydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill
  • 14.00-24, 8x
  • 560 L
  • Hydraulic: 390 L
  • Approx: 43,900 kg (Basic Machine: 735 M)
  • 2 x 150 ah, battery disconnect switch
  • Slewing Ring: External gear slewing ring with 360° protection and pinion tooth lubriaction | Disel Filter: With water integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
  • Central Lubrication: Atomatic central lubrication for equipment and slewing gear raceaway.