2017 Sennebogen 735 E Base
- Year 2017
- Make Sennebogen
- Model 735 E
- Engine Cummits QSL 9-C300 Level IV. Direct Injection, turbo charged, charge air cooler, reduced emissions, Eco mode, idle automation, stop automation, fuel pre-warming
2017 Sennebogen 735 E Base
2017 Sennebogen 735 E
Diesel-fueled or electric-drive machines from 44,000 lbs. (24,000 kg) to 750,000 lbs. (300,000 kg) with reach options from 30’ (9 m) to 130’ (40 m) including Balance cranes and Green Hybrid models.
All models may be mounted on the full range of platforms including rubber tired or tracked undercarriages, pedestal and stationary mounts, locomotive, gantry.
Features may include:
More Throughput- With its ample power and a stable platform, the 735 is able to pick loads up to 20 t and carry them safely at optimum speeds.
- A 186 kW diesel engine and wide-stance undercarriage lets the 735 cover ground in wood yards at forward and reverse speeds up to 12 mph.
- With all-wheel drive and two-axle steering, SENNEBOGEN pick & carry machines are specially designed to move wood efficiently through narrow lanes at mills and log yards.
Engine
Engine
Cummits QSL 9-C300 Level IV. Direct Injection, turbo charged, charge air cooler, reduced emissions, Eco mode, idle automation, stop automation, fuel pre-warming
Engine Power
224 kW / 300 hp at 200 rpm
Cooling
Water-cooled, cooler fan reversal | Uppercarriage: 3-cicruit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
Air Filter
Dry filter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Motor
Gearbox
Compact, planetary gear with slant axis hydraulic motor, integrated brake valves
Hydraulics
Hydraulic Type
Load sensing7LUDV hyrdraulic system, hydraulic, pilot-controlled work functions, load limit sensing control | Filtration: High-performance filtration with long change interval
Pump Type
Zero-stroke control, on-demand flow-control-the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
Maximum Pressure
max. 740 l/min
Minimum Hydraulic Pressure
to 350 bar
Lift Cylinders
Hydraulic clylinders with high-quality sealing and guide elements, end position damping, sealed bearing points, pipe fracture safety valves for the hoist and stick cylinders
Brakes
Parking Brake
Slewing Drive: Spring-loeaded disk brake | Undercarriage: Spring-loaded disk brake
Electric
Electrical
Uppercarriage: Central electrical distributor, battery disconnect switch | 24V
Operational
Drive System
Undercarriage: All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve and 2-stage power shift transmission planetary axles with integrated steering culinders, service brake in 2-circuit system, automatic central lubrication, steering direction reversal, direction of the travel reversal, protection for travel drive
Drive Control
Hydraulic System: Porportional. precision hydraulic activation of work movement, 2 hydraulic servo joysticks for work funtions, supplemental functions, via switches and foot pedals
Operating Speed
Slewing: 0-7 rmp, variable | Undercarriage: 0-20 km/h, variable
Chassis
Chassis
Upper Carriage: Torsion-resistant box design, precision craftedm steel bushings for boom bearing arrangement. Extremely service-friendly concept, engine intalled in the longitudinal direction | Attachments: Decades of experience, state-of-the-art computer simulation, highest level of stability, Longest service life, large-dimensioned and low-maintenance bearing point, sealed special bearing bushes, precicion-crafted, quick-release cuoupling on the connections - open/close/rotate grapple | Under Carriage: Stable walded construction in box design, type MF37E
Cab
Cab Construction
Rigid cab height elevation 1 m | Equipment: Sliding door, exellent ergonomics, climate automation, seat heater air suspension comfort, seat, fresh air filter / circulating air filter, joystick steering 12 V / 24 V connections, SECON V2, full protective grating
Lights and Safety
Safety Features
UpperCarriage: Perimeter uppcariage railing | Hydraulic System: Gydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill
Wheels & Tires
Tires, Front Specification
14.00-24, 8x
Capacities
Fuel Capacity
560 L
Tank Type
Hydraulic: 390 L
Weights
Dry Weight
Approx: 43,900 kg (Basic Machine: 735 M)
Battery
Battery
2 x 150 ah, battery disconnect switch
Features
Features
Slewing Ring: External gear slewing ring with 360° protection and pinion tooth lubriaction | Disel Filter: With water integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Lubrication
Central Lubrication: Atomatic central lubrication for equipment and slewing gear raceaway.