2017 Sennebogen 723 E Base
- Year 2017
- Make Sennebogen
- Model 723 E
- Engine Cummins, QSB 4.5 TIER III / IVi / IVf. Direct injection, turbo charged, charged air cooler, reduced emissions, Eco Mode, Idle automation, stop automation
2017 Sennebogen 723 E Base
2017 Sennebogen 723 E
Diesel-fueled or electric-drive machines from 44,000 lbs. (24,000 kg) to 750,000 lbs. (300,000 kg) with reach options from 30’ (9 m) to 130’ (40 m) including Balance cranes and Green Hybrid models.
All models may be mounted on the full range of platforms including rubber tired or tracked undercarriages, pedestal and stationary mounts, locomotive, gantry.
Features may include:
More Throughput- With its ample power and a stable platform, the 735 is able to pick loads up to 20 t and carry them safely at optimum speeds.
- A 186 kW diesel engine and wide-stance undercarriage lets the 735 cover ground in wood yards at forward and reverse speeds up to 12 mph.
- With all-wheel drive and two-axle steering, SENNEBOGEN pick & carry machines are specially designed to move wood efficiently through narrow lanes at mills and log yards.
Engine
Engine
Cummins, QSB 4.5 TIER III / IVi / IVf. Direct injection, turbo charged, charged air cooler, reduced emissions, Eco Mode, Idle automation, stop automation
Engine Power
723 MHD: 119 kW/160 hp at 2200 rpm
Cooling
Water-cooled
Air Filter
Dry air filter with cyclonic pre-filter, safety element, contamination indicator.
Motor
Gearbox
Planetary gearbox with axial piston motor and integrated brakes valves
Hydraulics
Hydraulic Type
Load-sensing/LUDV hydraulic system for work and travel functions | Filtration: High-performance filtration with long change interval.
Maximum Pressure
max. 350 bar
Pump Type
Swashplate-type variable-displecement piston pump, load pressure-independent flow distribution for simultaneus, independent control of work functions
Lift Cylinders
Special Hydraulic cylinder with hydraulic end position damping, optimized kinematics for high lifting power. The material handling attachment is specifically designed fot high performance applications.
Brakes
Parking Brake
Slewing Drive: Spring-loaded, hydraulically vanted safety multy-disk brake | Undercarriage: Spring-loaded multi-disk brake
Electric
Electrical
Uppercarriage: Central electrical distributor, battery disconnect switch| 24 V
Operational
Drive System
Undercarriage: All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve and 2-stage power shift transmission. Strong planetary axles with intergrated steering cylinder 2-cicuit multi-disk service brake.
Drive Control
Pump Control: Zero-stroke control, on-demand flow - The pumps only pump as much oil as will actually be used, pressure purging load limit sensing control | Hydraulic System: Proportional, precision hydraulic actuation of work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals
Operating Speed
Slewing: 0-8 rpm, variable Hydraulic brake valves integrated into motor ensure wear-free braking | Undercarriage: Stage I 0-5.5 km/h; stage II: 0.20 km/h
Chassis
Chassis
Upper Carriage: Torsion-resistant upper frame with end shields all the way from boom linkage to counterweight for optimized force transmision, precision-crafted steel bushings for boom bearings, lockable storage compartment outstanding design, very low noise emissions | Attachments: Sealed and soiling-protected box design with oversized bearing points for long service life. Oversized special bushings, precision-crafted | Under Carriage: Robust mobile uundercarriage, box design type MF33E
Cab
Cab Construction
Rigid cab height elevation 1 m | Equipment: Sliding door excellent ergonomics, climate automation, seat heater, air-suspension comfort seat, freash air filter/ciculating air filter , joystick steering 12 V / 24 V connections, SENCON V2, full protective grating
Lights and Safety
Safety Features
UpperCarriage: right and rearview cameras | Hydraulic System: All hydraulic cicuits secured with safety valves, hydraulic accumulator for emergency lowering of attachment and cab in case of engine failure pipe-fracture safety valves for stick and hoist cylinders
Wheels & Tires
Tires, Front Specification
12.00-20,8 off
Capacities
Fuel Capacity
330 L
Tank Type
Hydraulic: 260 L
Weights
Dry Weight
Approx: 27,00 kg
Battery
Battery
2 x cold-start high-performance batteries
Features
Lubrication
Central Lubrication: Automatic central lubrication for equipment and slewing gear raceway
Features
Slewing Ring: large dimensioned slewing ring