Engine
Emissions
Rating: EPA Tier 4 Final
Engine Manufacturer
Yanmar
Engine
Model: 3TNV80F
Aspiration
Natural
Cooling
Fan drive: Direct
Displacement
77.5 in³ (1.3 L)
Engine Power
Gross: 18.2 hp (13.4 kW) @ 2,200 rpm | Net: 17.1 hp (12.6 kW) @ 2,200 rpm
Engine Torque, Maximum
Peak: 48.2 lb·ft (65.3 N·m) 1,600 rpm
Cylinder Liners
3
Bore
3.1 in (80 mm)
Stroke
3.3 in (84 mm)
Drivetrain
Gears
Swing System: Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.
Drive System
2-speed axial piston motors with oil disk brakes.
Steering
Steering controlled by two detachable hand levers with pedals.
Brakes
Parking Brake
Swing System: Swing parking brake resets within five seconds after swing pilot controls return to neutral.
Battery
Battery
12V (one)
Electric
Electrical
System voltage: 12V
Alternator
12V - 40A
Electric Start
12V - 1.9 hp (12V - 1.4 kW )
Operational
Operating Speed
Swing: 9.5 rpm | Travel High: 2.8 mph (4.5 km/h) | Travel Low: 1.7 mph (2.7 km/h)
Operating Conditions
Swing torque: 1,563 lbf (2,119 N·m) | Gradeability: 30° / 58% | Max. drawbar pull: 3,597 lb·ft (16 kN) | Bucket digging force (ISO): 3,597 lbf (16 kN) | Arm digging force (ISO) (Cab/Canopy): 1,776 lb·ft (8 kN) / 2,023 lb·ft (9 kN)
Performance
Noise Level
Interior sound level (ISO 6396): 78 dB(A) | Exterior sound level (ISO 6395): 90 dB(A)
Hydraulics
Pump Type
Load-sensing variable piston pump
Hydraulic Flow
Maximum: 15 gal/min (55 L/min)
Relief Valve Setting
Implement: 3,046 psi (21 MPa) | Travel circuit: 3,046 psi (21 MPa) | Slew circuit: 1,914 psi (13.2 MPa) | Pilot circuit: 566 psi (3.9 MPa)
Dimensions
Bore
Hydraulic Boom Cylinder: 2.4 in (60 mm) | Hydraulic Arm Cylinder: 2.4 in (60 mm) | Hydraulic Bucket Cylinder: 2.4 in (60 mm)
Stroke
Hydraulic Boom Cylinder: 18 in (462 mm) | Hydraulic Arm Cylinder: 14 in (365 mm) | Hydraulic Bucket Cylinder: 11 in (295 mm)
Dimensions
Rubber track assembly: 9 in (230 mm) | Boom: 5 ft 6 in (1.69 m) | Tail swing radius: 3 ft 6 in (1,070 mm) | Max boom offset to the right: 1 ft 4 in (419 mm) | Max boom offset to the left: 1 ft 10 in (558 mm) | Max boom swing angle to the right: 58° | Max boom swing angle to the left: 72° | Max. digging reach (Cab/Canopy): 13 ft 3 in (4,040 mm) / 12 ft 10 in (3,910 mm) | Max. digging reach at ground level (Cab/Canopy): 13 ft 1 in (3,980 mm) 12 ft 8 in (3,850 mm) | Min. front swing radius (Cab/Canopy): 5 ft 7 in (1,700 mm) / 5 ft 5 in (1,660 mm) | Dozer up: 9 in (240 mm) | Dozer down: 9 in (240 mm) | Bucket tip radius: 1 ft 10 in (548 mm)
Length
Shipping (Cab/Canopy): 12 ft 0 in (3,668 mm) / 10 ft 2 in (3,099 mm) | to center of rollers: 4 ft 0 in (1,230mm)
Height
Max. shipping to top of cab/canopy: 8 ft 0 in (2,438 mm) | Max. digging (Cab/Canopy): 11 ft 5 in (3,475 mm) / 11 ft 1 in (3,385 mm) | Max. dumping (Cab/Canopy): 8 ft 1 in (2,460 mm) / 7 ft 9 in (2,370 mm)
Gauges
Track gauge (retractable/unretractabe): 2 ft 6 in / 3 ft 6 in (750 mm / 1,060 mm)
Width
Undercarriage: 3 ft 3 in / 4 ft 3 in (980 mm / 1,295 mm)
Track Length
5 ft 2 in (1,580 mm)
Track Width
9 in (230 mm)
Ground Clearance
Counterweight: 1 ft 5 in (435 mm)
Overall Height
Cab: 5 ft 4 in (1,635 mm) / Canopy: 5 ft 6 in (1,670 mm)
Overall Width
of the upper-structure: 3 ft 3 in (980 mm)
Depth, Maximum
Maximum Digging (Cab/Canopy): 8 ft 0 in (2,430 mm) 7 ft 6 in (2,290 mm)
Capacities
Fuel Capacity
Tank: 7.4 gal (28 L)
Oil capacity
1.2 gal (4.4 L)
Cooling System
0.9 gal (3.3 L)
Hydraulic Capacity
Reservoir: 6.3 gal (24 L)
Cargo Capacity
Bucket: 0.06 yd³ (0.045 m³)
Features
Features
Top rollers each side: 3
