2017 Sennebogen 818 R-HD E Base

Information

2017 Sennebogen 818 R-HD E

Diesel-fueled or electric-drive machines from 44,000 lbs. (24,000 kg) to 750,000 lbs. (300,000 kg) with reacz options from 30’ (9 m) to 130’ (40 m) including Balance cranes and Green Hybrid models.

All models may be mounted on the full range of platforms including rubber tired or tracked undercarriages, pedestal and stationary mounts, locomotive, gantry.

Features may include:

Harbor Cab
  • Developed for operation on seaports and waterways, the spacious maXcab affords excellent visibility above, below, forward and to the sides.
Puller undercarriage
  • The 830 M-T trailer puller is mounted on an undercarriage specially engineered to withstand heavy pulling stresses, with separate transmissions on each axle for added pulling power and traction.
Dual cameras
  • Only SENNEBOGEN provides a right-view and rear-view camera as standard to provide 360o visibility with a view past the boom.

Photos

Highlights

  • Stratton, Ontario
  • 2017
  • Sennebogen
  • 818 R-HD E Base
  • Cummins QSB4.5-C130
  • Upper Carriage: torsion-free upper frame with continuous bearing-plates for optimal power introduction, precision pivot; excellent design; very low noise emission | Under Carriage: crawler R25/240 | Shoes: 26.6" (600 mm) (triple grouser) | Crawler: B4HD maintenance free
  • Available

Specifications

  • 2017
  • Sennebogen
  • 818 R-HD E
  • Base
  • General
  • Cummins QSB4.5-C130
  • in-line, 4 cylinder, cooled exhaust gas recirculation, water cooled | Control: integrated ECM automatic idle - stop eco mode
  • 132 HP (97 kW) @ 2200 rpm
  • EPA Tier 4 Final
  • high pressure common-rail
  • 4.5 L (272 cu.in.)
  • 4.21 in (107 mm)
  • 4.88 in (124 mm)
  • cool-on-demand, suction-type fan system, side by side | Hydraulic/Water: hydraulic fan drive axial piston pump, reversible fan thermostatically controlled, closed loop system | Charge air: direct fan drive
  • direct flow filtration system dual stage filter with pre-filter
  • foot pedals / levers
  • LUDV load sensing pilot pressure controlled open center | Filtration: dual filtration system 3 micron (HydroClean) | Swing: open loop
  • 5,076 psi (350 bar)
  • variable-displacement axial-piston pump
  • 82 gal (310 l/min)
  • Swing: multidisc brake, spring loaded
  • 24 V, 4.8 kW
  • Rating: 9 kW | Voltage: 230 V | Current (cold condition): 39 Amps
  • 95 V/Ah
  • Swing System: 1 x axial piston motor driving planetary rbox, integrated brake vales | Under Carriage: independent driven by an axial piston motor through a compact planetary| Magnet: hydraulic
  • Undercarriage: fixed wide gauge
  • Slewing: 0 - 8 rpm | Undercarriage: 0-1.4 mph (0-2.4 km/h)
  • Upper Carriage: torsion-free upper frame with continuous bearing-plates for optimal power introduction, precision pivot; excellent design; very low noise emission | Under Carriage: crawler R25/240 | Shoes: 26.6" (600 mm) (triple grouser) | Crawler: B4HD maintenance free
  • Swing Bearing: internal teeth, sealed ball bearing
  • 2 x cab roof, type halogen 2 x frame upper carriage, type H4
  • UnderCarriage: travel alarm
  • 87 gal (330 L)
  • Hydraulic: 69 gal (260 L)
  • 55,115 lb (25,000 kg)
  • 2 x 12 V, 150 Ah