2017 Sennebogen 723 E Base

Information

2017 Sennebogen 723 E

Diesel-fueled or electric-drive machines from 44,000 lbs. (24,000 kg) to 750,000 lbs. (300,000 kg) with reach options from 30’ (9 m) to 130’ (40 m) including Balance cranes and Green Hybrid models.

All models may be mounted on the full range of platforms including rubber tired or tracked undercarriages, pedestal and stationary mounts, locomotive, gantry.

Features may include:

More Throughput
  • With its ample power and a stable platform, the 735 is able to pick loads up to 20 t and carry them safely at optimum speeds.
Wide-Stance Stability
  • A 186 kW diesel engine and wide-stance undercarriage lets the 735 cover ground in wood yards at forward and reverse speeds up to 12 mph.
Compact Mobility
  • With all-wheel drive and two-axle steering, SENNEBOGEN pick & carry machines are specially designed to move wood efficiently through narrow lanes at mills and log yards.

Photos

Highlights

  • Stratton, Ontario
  • 2017
  • Sennebogen
  • 723 E Base
  • Cummins, QSB 4.5 TIER III / IVi / IVf. Direct injection, turbo charged, charged air cooler, reduced emissions, Eco Mode, Idle automation, stop automation
  • Upper Carriage: Torsion-resistant upper frame with end shields all the way from boom linkage to counterweight for optimized force transmision, precision-crafted steel bushings for boom bearings, lockable storage compartment outstanding design, very low noise emissions | Attachments: Sealed and soiling-protected box design with oversized bearing points for long service life. Oversized special bushings, precision-crafted | Under Carriage: Robust mobile uundercarriage, box design type MF33E
  • Approx: 27,00 kg
  • Available

Specifications

  • 2017
  • Sennebogen
  • 723 E
  • Base
  • General
  • Cummins, QSB 4.5 TIER III / IVi / IVf. Direct injection, turbo charged, charged air cooler, reduced emissions, Eco Mode, Idle automation, stop automation
  • 723 MHD: 119 kW/160 hp at 2200 rpm
  • Water-cooled
  • Dry air filter with cyclonic pre-filter, safety element, contamination indicator.
  • Planetary gearbox with axial piston motor and integrated brakes valves
  • Load-sensing/LUDV hydraulic system for work and travel functions | Filtration: High-performance filtration with long change interval.
  • max. 350 bar
  • Swashplate-type variable-displecement piston pump, load pressure-independent flow distribution for simultaneus, independent control of work functions
  • Special Hydraulic cylinder with hydraulic end position damping, optimized kinematics for high lifting power. The material handling attachment is specifically designed fot high performance applications.
  • Slewing Drive: Spring-loaded, hydraulically vanted safety multy-disk brake | Undercarriage: Spring-loaded multi-disk brake
  • Uppercarriage: Central electrical distributor, battery disconnect switch| 24 V
  • Undercarriage: All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve and 2-stage power shift transmission. Strong planetary axles with intergrated steering cylinder 2-cicuit multi-disk service brake.
  • Pump Control: Zero-stroke control, on-demand flow - The pumps only pump as much oil as will actually be used, pressure purging load limit sensing control | Hydraulic System: Proportional, precision hydraulic actuation of work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals
  • Slewing: 0-8 rpm, variable Hydraulic brake valves integrated into motor ensure wear-free braking | Undercarriage: Stage I 0-5.5 km/h; stage II: 0.20 km/h
  • Upper Carriage: Torsion-resistant upper frame with end shields all the way from boom linkage to counterweight for optimized force transmision, precision-crafted steel bushings for boom bearings, lockable storage compartment outstanding design, very low noise emissions | Attachments: Sealed and soiling-protected box design with oversized bearing points for long service life. Oversized special bushings, precision-crafted | Under Carriage: Robust mobile uundercarriage, box design type MF33E
  • Rigid cab height elevation 1 m | Equipment: Sliding door excellent ergonomics, climate automation, seat heater, air-suspension comfort seat, freash air filter/ciculating air filter , joystick steering 12 V / 24 V connections, SENCON V2, full protective grating
  • UpperCarriage: right and rearview cameras | Hydraulic System: All hydraulic cicuits secured with safety valves, hydraulic accumulator for emergency lowering of attachment and cab in case of engine failure pipe-fracture safety valves for stick and hoist cylinders
  • 12.00-20,8 off
  • 330 L
  • Hydraulic: 260 L
  • Approx: 27,00 kg
  • 2 x cold-start high-performance batteries
  • Slewing Ring: large dimensioned slewing ring
  • Central Lubrication: Automatic central lubrication for equipment and slewing gear raceway