2025 LiuGong Compact Excavators 9027FZTS

Information

2025 LiuGong Compact Excavators 9027FZTS

ZERO TAIL SWING. IT’S IDEAL IF YOU WORK IN TIGHT SPACES.

The 9027FZTS was designed with a number of features to help operators. Zero tail swing, high level diagnostics, and two knobs to control auxiliary flow for precise operation, to help you get more done.

Features may include:

Power Without Waste

The new 9027 Excavator is powered by the latest fuel efficient Yanmar 3TNV80F engine, it has a net power rating of 20.4 hp (15.2 kW) and fully complies with Tier IV Final emission standards without compromising on power or performance. The refined combustion process assures precise fuel delivery and control. The result is reduced emissions, improved performance over a wide range of application and increased fuel economy.

Ultimate Comfort

The new 9027FZTS Excavator provides an operator platform geared to get more work done with creature comforts that make those 12 hour days a breeze. Ergonomic controls and excellent all-around visibility, the platform enables full control of the operator station.

Ease Of Use

When it's time to perform the standard daily maintenance checks, the new 9027 Excavator makes access to critical areas easy on the operator.

Short Tailswing

The 9027’s design is built for operating in those hard to maneuver locales like congested roadways, near commercial buildings and residences and anywhere obstacles can impede work.

Photos

Highlights

  • Stratton, Ontario
  • 2025
  • LiuGong
  • Compact Excavators 9027FZTS
  • Model: 3TNV80F
  • Available
  • Undercarriage: 5 ft 1 in (1,550 mm)
  • Max. shipping to top of cab/canopy: 8 ft 1 in (2,450 mm) | Max. digging: 14 ft 4 in (4,365 mm) | Max. dumping: 10 ft 1 in (3,067 mm)

Specifications

  • 2025
  • LiuGong
  • Compact Excavators
  • 9027FZTS
  • Compact
  • Model: 3TNV80F
  • Rating: EPA Tier 4 Final - Stage V
  • Yanmar
  • Natural
  • Fan drive: Direct
  • 77.3 in³ (1.267 L)
  • Output power: 20.4 hp (15.2 kW) @ 2,500 rpm
  • Peak: 49.6 lb·ft (67.3 N·m) 1,800 rpm
  • 3
  • Hydraulic Boom Cylinder: 2.7 in (70 mm) | Hydraulic Arm Cylinder: 2.7 in (70 mm) | Hydraulic Bucket Cylinder: 2.5 in (65 mm)
  • Hydraulic Boom Cylinder: 20.1 in (510 mm) | Hydraulic Arm Cylinder: 19 in (482 mm) | Hydraulic Bucket Cylinder: 15 in (382 mm)
  • Swing System: Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.
  • 2-speed axial piston motors with oil disk brakes.
  • Steering controlled by two detachable hand levers with pedals.
  • Swing System: Swing parking brake resets within five seconds after swing pilot controls return to neutral.
  • 12 V (one)
  • System voltage: 12 V
  • 12 V - 40A
  • 12 V - 1.9 hp (12 V - 1.4 kW )
  • Swing: 9.5 rpm | Travel High: 2.8 mph (4.5 km/h) | Travel Low: 1.7 mph (2.7 km/h)
  • Swing torque: 3,395 lbf·ft (4,600 N·m) | Gradeability: 30° / 58% | Max. drawbar pull: 5,530 lb·ft (24.6 kN) | Bucket digging force (ISO): 4,496 lbf (20 kN) | Arm digging force (ISO): 2,698 lbf (12 kN)
  • Interior sound level (ISO 6396): 79 dB(A) | Exterior sound level (ISO 6395): 93 dB(A)
  • Load-sensing variable piston pump
  • Maximum: 22.8 gal/min (86.4 L/min)
  • Implement: 3,133 psi (21.6 MPa) | Travel circuit: 3,133 psi (21.6 MPa) | Slew circuit: 2,698 psi (18.6 MPa) | Pilot circuit: 566 psi (3.9 MPa)
  • Rubber track assembly: 12 in (300 mm) | Boom: 6 ft 10 in (2.08 m) | Arm: 4 ft 3 in (1.3 m) | Tail swing radius: 2 ft 7 in (775 mm) | Max boom offset to the right: 2 ft 3 in (694 mm) | Max boom offset to the left: 1 ft 8 in (498 mm) | Max boom swing angle to the right: 54.5° | Max boom swing angle to the left: 74° | Max. digging reach: 15 ft 7 in (4,757 mm) | Max. digging reach at ground level: 15 ft 3 in (4,648 mm) | Min. front swing radius: 6 ft 5 in (1,965 mm) | Dozer up: 1 ft 2 in (350 mm) | Dozer down: 1 ft 4 in (400 mm) | Bucket tip radius: 2 ft 2 in (662 mm)
  • Shipping: 13 ft 8 in (4,160 mm) | to center of rollers: 5 ft 1 in (1,540 mm)
  • Max. shipping to top of cab/canopy: 8 ft 1 in (2,450 mm) | Max. digging: 14 ft 4 in (4,365 mm) | Max. dumping: 10 ft 1 in (3,067 mm)
  • Track: 4 ft 1 in (1,250 mm)
  • Undercarriage: 5 ft 1 in (1,550 mm)
  • 6 ft 5 in (1,953 mm)
  • 12 in (300 mm)
  • Counterweight: 1 ft 9 in (530 mm)
  • Max. digging: 9 ft 4 in (2,857 mm) | Max. vertical wall digging: 7 ft 7 in (2,312 mm) | Max. digging 2.5m (8 ft 2 in) level bottom: 7 ft 10 in (2,386 mm)
  • Tank: 7.1 gal (27 L)
  • 1.2 gal (4.4 L)
  • 1.3 gal (5 L)
  • Reservoir: 6.9 gal (26 L)
  • Bucket: 0.065 yd³ (0.05 m³ )
  • Bottom rollers each side: 3 | Top rollers each side: 1