2025 LiuGong Compact Excavators 9018F

Information

2025 LiuGong Compact Excavators 9018F

TALK ABOUT A GOOD FIT

The 9018F’s compact stature, combined with a retractable undercarriage, allows operators to easily pass through narrow entryways. 51-inch outside-tread-to-outside tread measurement retracts to just 39 inches when needed and then expands back out for balance and stabilization during operation.

Features may include:

Power Without Waste

The new 9018F Excavator is powered by the latest fuel efficient Yanmar 3TNV80F engine, it has a net power rating of 13.4 kW (18 hp) and fully complies with Tier IV Final emission standards without compromising on power or performance. The refined combustion process assures precise fuel delivery and control. The result is reduced emissions, improved performance over a wide range of application and increased fuel economy.

Ultimate Comfort

The new 9018F Excavator provides an operator platform geared to get more work done with creature comforts that make those 12 hour days a breeze. Ergonomic controls and excellent all-around visibility, the platform enables full control of the operator station.

Ease Of Use

When it’s time to perform the standard daily maintenance checks, the new 9018F Excavator makes access to critical areas easy on the operator.

Short Tailswing

The 9018F’s design is built for operating in those hard to maneuver locales like congested roadways, near commercial buildings and residences and anywhere obstacles can impede work.

Photos

Highlights

  • Stratton, Ontario
  • 2025
  • LiuGong
  • Compact Excavators 9018F
  • Model: 3TNV80F
  • Available
  • Undercarriage: 3 ft 3 in / 4 ft 3 in (980 mm / 1,295 mm)
  • Max. shipping to top of cab/canopy: 8 ft 0 in (2,438 mm) | Max. digging (Cab/Canopy): 11 ft 5 in (3,475 mm) / 11 ft 1 in (3,385 mm) | Max. dumping (Cab/Canopy): 8 ft 1 in (2,460 mm) / 7 ft 9 in (2,370 mm)

Specifications

  • 2025
  • LiuGong
  • Compact Excavators
  • 9018F
  • Compact
  • Model: 3TNV80F
  • Rating: EPA Tier 4 Final
  • Yanmar
  • Natural
  • Fan drive: Direct
  • 77.5 in³ (1.3 L)
  • Gross: 18.2 hp (13.4 kW) @ 2,200 rpm | Net: 17.1 hp (12.6 kW) @ 2,200 rpm
  • Peak: 48.2 lb·ft (65.3 N·m) 1,600 rpm
  • 3
  • Hydraulic Boom Cylinder: 2.4 in (60 mm) | Hydraulic Arm Cylinder: 2.4 in (60 mm) | Hydraulic Bucket Cylinder: 2.4 in (60 mm)
  • Hydraulic Boom Cylinder: 18 in (462 mm) | Hydraulic Arm Cylinder: 14 in (365 mm) | Hydraulic Bucket Cylinder: 11 in (295 mm)
  • Swing System: Planetary gear reduction driven by high torque axial piston motor, with oil disk brake.
  • 2-speed axial piston motors with oil disk brakes.
  • Steering controlled by two detachable hand levers with pedals.
  • Swing System: Swing parking brake resets within five seconds after swing pilot controls return to neutral.
  • 12V (one)
  • System voltage: 12V
  • 12V - 40A
  • 12V - 1.9 hp (12V - 1.4 kW )
  • Swing: 9.5 rpm | Travel High: 2.8 mph (4.5 km/h) | Travel Low: 1.7 mph (2.7 km/h)
  • Swing torque: 1,563 lbf (2,119 N·m) | Gradeability: 30° / 58% | Max. drawbar pull: 3,597 lb·ft (16 kN) | Bucket digging force (ISO): 3,597 lbf (16 kN) | Arm digging force (ISO) (Cab/Canopy): 1,776 lb·ft (8 kN) / 2,023 lb·ft (9 kN)
  • Interior sound level (ISO 6396): 78 dB(A) | Exterior sound level (ISO 6395): 90 dB(A)
  • Load-sensing variable piston pump
  • Maximum: 15 gal/min (55 L/min)
  • Implement: 3,046 psi (21 MPa) | Travel circuit: 3,046 psi (21 MPa) | Slew circuit: 1,914 psi (13.2 MPa) | Pilot circuit: 566 psi (3.9 MPa)
  • Rubber track assembly: 9 in (230 mm) | Boom: 5 ft 6 in (1.69 m) | Tail swing radius: 3 ft 6 in (1,070 mm) | Max boom offset to the right: 1 ft 4 in (419 mm) | Max boom offset to the left: 1 ft 10 in (558 mm) | Max boom swing angle to the right: 58° | Max boom swing angle to the left: 72° | Max. digging reach (Cab/Canopy): 13 ft 3 in (4,040 mm) / 12 ft 10 in (3,910 mm) | Max. digging reach at ground level (Cab/Canopy): 13 ft 1 in (3,980 mm) 12 ft 8 in (3,850 mm) | Min. front swing radius (Cab/Canopy): 5 ft 7 in (1,700 mm) / 5 ft 5 in (1,660 mm) | Dozer up: 9 in (240 mm) | Dozer down: 9 in (240 mm) | Bucket tip radius: 1 ft 10 in (548 mm)
  • Shipping (Cab/Canopy): 12 ft 0 in (3,668 mm) / 10 ft 2 in (3,099 mm) | to center of rollers: 4 ft 0 in (1,230mm)
  • Max. shipping to top of cab/canopy: 8 ft 0 in (2,438 mm) | Max. digging (Cab/Canopy): 11 ft 5 in (3,475 mm) / 11 ft 1 in (3,385 mm) | Max. dumping (Cab/Canopy): 8 ft 1 in (2,460 mm) / 7 ft 9 in (2,370 mm)
  • Track gauge (retractable/unretractabe): 2 ft 6 in / 3 ft 6 in (750 mm / 1,060 mm)
  • Undercarriage: 3 ft 3 in / 4 ft 3 in (980 mm / 1,295 mm)
  • 5 ft 2 in (1,580 mm)
  • 9 in (230 mm)
  • Counterweight: 1 ft 5 in (435 mm)
  • Cab: 5 ft 4 in (1,635 mm) / Canopy: 5 ft 6 in (1,670 mm)
  • of the upper-structure: 3 ft 3 in (980 mm)
  • Maximum Digging (Cab/Canopy): 8 ft 0 in (2,430 mm) 7 ft 6 in (2,290 mm)
  • Tank: 7.4 gal (28 L)
  • 1.2 gal (4.4 L)
  • 0.9 gal (3.3 L)
  • Reservoir: 6.3 gal (24 L)
  • Bucket: 0.06 yd³ (0.045 m³)
  • Top rollers each side: 3