2025 LiuGong Crawler Dozers TD-25M

Information

2025 LiuGong Crawler Dozers TD-25M

OPERATORS FIRST

The Dressta TD-25 Series is the first of our heavy-duty crawler dozer range, starting with a net flywheel power of 375 hp (280 kW) and an operating weight of 41.5t. The machines are built to excel in heavy mining, coal and construction projects, incorporating advanced technologies and components for optimal performance.

Features may include:

Power Without Waste

Environmental as well as economic awareness lie at the heart of our new TD25. Powered by the latest fuel efficient Cummins QSX15 engine, it has a net power rating of 280 kW (375 hp) and fully complies with Tier 4 Final emission standards without compromising on power or performance. The single stage 16 in torque converter with a 2.45:1 stall ratio drives to the transmission through a double universal joint.

See More, Do More

Our TD25 Cab provides a clear view to the blade and ripper working areas and the entire job site, with a direct line of sight to the cutting edge, making it easy to follow the flow of material under the blade.

Modular Construction

All service and maintenance points are clearly marked and easily accessible, with diagnostic points conveniently grouped together. The on-board system provides the operator with a range of status data including the incoming daily services. The TD-25 has been designed for easy access and reliability to reduce downtime, maximize uptime and make servicing as simple and cost effective as possible.

Maximized Traction & Drawbar Pull

The TD-25 is powered by Cummins QSX 15 Engine that delivers steady torque and power for efficient dozing and ripping performance. The robust powershift transmission combined with the unique 2-Speed Steering Drive transfers 100% engine power to both tracks for better load retention in turns and provides the best in the class Drawbar Pull, up to 20% more than competitors. It is fitted with variety of track shoes ranging from 22” to 30” width and has multiple blade choices; Semi-U 9.6m3 (standard), Full-U 11,5 m3 , Coal 21m3 and Angle 5.7m3. These meet wide range of requirements for applications, varying from rocky quarries, to road and highway, conduction, landscaping and municipality works.

Photos

Highlights

  • Stratton, Ontario
  • 2025
  • LiuGong
  • Crawler Dozers TD-25M
  • Model: X15
  • Single stage 415 mm (16 in) torque converter with a 2.45:1 stall ratio drives to transmission through a double universal joint. Modular, countershaft type power shift transmission, electro-hydraulic control. Preset travel speed and auto-downshift.
  • Available
  • Track shoe: 22 in (560 mm) | Over track: 8 ft 10 in (2700 mm) | Over trunnions Semi-U/Full-U/Angle/Coal: 10 ft 6 in (3210 mm) | Blade: Semi-U: 13 ft 3 in (4050 mm) / Full-U: 14 ft 3 in (4350 mm) / Angle: 16 ft 3 in (4950 mm) / Coal: 18 ft 5 in (5610 mm) | Folded Blade 6-way: 9 ft 1 in (2893 mm) | Ripping Multi-shank: 84 in (2134 mm)
  • Grouser: 3 in (76 mm) | Blade: Semi-U/Full-U: 5 ft 9 in (1760 mm) / Angle: 4 ft 1 in (1260 mm) / Coal: 6 ft 11 in (2100 mm)

Specifications

  • 2025
  • LiuGong
  • Crawler Dozers
  • TD-25M
  • Crawler
  • Model: X15
  • Tier 4 Final
  • Cummins
  • 912 in³ (15 l)
  • 5.39 in (137 mm) | Hydraulic Cylinder lift: 3.94 in (100 mm) | Hydraulic Cylinder tilt: 5.9 in (150 mm) | Hydraulic Cylinder tilt/pitch : 5.1 in (130 mm)
  • 6.65 in (169 mm) | Hydraulic Cylinder lift: 43.1 in (1095 mm) | Hydraulic Cylinder tilt: 11.7 in (297.5 mm) | Hydraulic Cylinder tilt/pitch : 20.5 in (520 mm)
  • Gross: 375 hp (280 kW) | Net: 370 hp (277 kW) / 330 hp (246 kW)
  • 2000 rpm
  • 1600 lb-ft (2169 Nm) @ 1200 rpm
  • Cummins Filtration Direct Flow™, dry type, with dash-mounted electronic service indicator and turbo air pre-cleaner
  • Engine rating: –34°f (–37°C)
  • 17.4 gal (66 l)
  • Single stage 415 mm (16 in) torque converter with a 2.45:1 stall ratio drives to transmission through a double universal joint. Modular, countershaft type power shift transmission, electro-hydraulic control. Preset travel speed and auto-downshift.
  • Exclusive 2-speed geared steering module provides gradual turns while maintaining full power to both tracks plus conventional clutch-brake performance for tight or pivot turns. Coupled to 3-speed transmission, the 2-speed steering provides 6 speeds forward and 6 reverse. The left hand joystick controls transmission and steering drive for up and down shifting, steering, Hi/Lo selection and LH/RH gradual turn.
  • Double-reduction planetary type final drives mounted independently of track frames and dozer push arms for isolation from shock loads.
  • Oscillation-type with equalizer bar and forward mounted pivot shafts
  • Service: Spring applied hydraulically released multi-disc wet brakes. Foot pedal linkage control.
  • The steering brakes also act as service and parking brakes. Service brakes are locked automatically when the transmission safety lever is actuated or when the engine is cut off.
  • 1920 CCA
  • Voltage: 24 V
  • Rating: 105A
  • 14.3 psi (98.6 kPa)
  • Maximum drawbar pull: 178,498 lbf (794 kN) | Penetration force: Standard/Deep: 29768 lb (132.5 kN) / Multi-shank: 29494 lb (131.2 kN)| Pryout force: Standard/Deep: 84907 lb (377.7 kN) / Multi-shank: 79467 lb (353.5 kN)
  • Travel, Forward 1st: Low: 1.9 mph (3.0 km/h) / High: 2.5 mph (4.0 km/h) | Travel, Reverse 1st: Low: 2.3 mph (3.7 km/h) / High: 3.0 mph (4.8km/h) | Travel, Forward 2st: Low: 3.2 mph (5.1 km/h) / High: 4.1 mph (6.6 km/h) | Travel, Reverse 2st: Low: 3.8 mph (6.1 km/h) / High: 4.9 mph (7.9 km/h) | Travel, Forward 3st: Low: 5.0 mph (8.0 km/h) / High: 6.4 mph (10.3 km/h) | Travel, Reverse 3st: Low: 6.0 mph (9.6 km/h) / High: 7.6 mph (12.3 km/h)
  • Close-center load sensing hydraulic system with variable-displacement multi-piston double pump
  • Displacement: 50 + 37 gpm (190 + 140 l/min)
  • System relief: Blade lift/tilt & ripper 18.0 MPa (2,610 psi)
  • 10 total; cab mounted (side: 2 LH & 2 RH and 2 rear), 2 front - lift cylinders mounted and 2 rear fuel and hydraulic tanks mounted
  • Track gauge: 7 ft (2140 mm) | Track pitch: 9.86 in (250 mm)| Ground contact area: 5673 in² (3660 cm²) | Blade angle: 25 deg | Max. tilt: Semi-U: 34.6 in (880 mm) / Full-U: 37.2 in (945 mm) / Angle: 17.1 in (435 mm) / Coal: 48 in (1220 mm) | Max. blade pitch adjustment: Semi-U/Full-U/Coal: 10 deg / Standard/Deep/Multi-shank: 25.1 deg | Max. clearance under tip (raised): Standard: 30.3 in (770 mm) / Deep: 29.9 in (760 mm) / Multi-shank: 34.2 in (868 mm) | Slope angle (full raise): 30.8 deg | Spacing center to center Multi-shank: 42 in (1067 mm) | Max. penetration: Standard: 49.2 in (1250 mm) / Deep: 66.9 in (1700 mm) / Multi-shank: 29.9 in (760 mm)
  • Track shoe: 22 in (560 mm) | Over track: 8 ft 10 in (2700 mm) | Over trunnions Semi-U/Full-U/Angle/Coal: 10 ft 6 in (3210 mm) | Blade: Semi-U: 13 ft 3 in (4050 mm) / Full-U: 14 ft 3 in (4350 mm) / Angle: 16 ft 3 in (4950 mm) / Coal: 18 ft 5 in (5610 mm) | Folded Blade 6-way: 9 ft 1 in (2893 mm) | Ripping Multi-shank: 84 in (2134 mm)
  • Track on ground: 10 ft 9 in (3270 mm) | Track on ground Rigid: 10 ft 4 in (3270 mm) | With blade and drawbar: Semi-U: 22 ft 7 in (6880 mm) / Full-U: 23 ft 5 in (7150 mm) / Angle: 22 ft 7 in (6890 mm) / Coal: 24 ft 8 in (7530 mm) | With blade and 1-shank/ 3-shank ripper: Semi-U: 29 ft 4 in/27 ft 6 in (8940 mm/8380 mm) / Full-U: 29 ft 4 in/27 ft 6 in (9210 mm/8650 mm) / Angle: 29 ft 4 in/27 ft 6 in (8950 mm/8390 mm) / Coal: - /29 ft 8 in (- /9030 mm)
  • FOPS Cab: 12 ft 3 in (3743 mm) | Beacon: 12 ft 10 in (3910 mm) | End of exhaust pipe: 12 ft 4 in (3759 mm)
  • Grouser: 3 in (76 mm) | Blade: Semi-U/Full-U: 5 ft 9 in (1760 mm) / Angle: 4 ft 1 in (1260 mm) / Coal: 6 ft 11 in (2100 mm)
  • Blade: Semi-U/Full-U/Coal: 4 ft 2 in (1270 mm) / Angle: 4 ft 6 in (1370 mm)
  • 22.6 in (576 mm)
  • Base machine: 16 ft 7 in (5070 mm)
  • Blade digging: Semi-U/Full-U/Coal: 23.6 in (600 mm) / Angle: 26 in (660 mm)
  • With blade angled: 15 ft 1 in (4590 mm) | Beam: Standard: 57 in (1450 mm) / Deep: 57 in (1450 mm) / Multi-shank: 98 in (2485 mm)
  • Tank: 203 gal (770 l)
  • 13 gal (49 l)
  • 63 gal (240 l)
  • Reservoir: 34 gal (131 l)
  • Sprocket sements, each side: 8 | Hydraulic control: Blade electric control valve; single joystick lever with blade automatic control and pitch/dual tilt control buttons | Total ratio: 25.5 to 1 | Number of batteries: 4 | Ripper Type: Parallelogram | Shank positions (vertical): Standard: 4 / Deep: 6 / Multi-shank: 2 | Shoes, each side: 39 | Track rollers, each side: 7
  • SAE: Semi-U: 12.5 yd³ (9.6 m³) / Full-U: 15 yd³ (11.5 m³) / Angle: 7.4 yd³ (5.7 m³) / Coal: 27.5 yd³ (21 m³)
  • Operating: 90940 lb (41250 kg)
  • Of Multi-shank: 700 lb (378 kg) | Of ripper incl. shank: Standard: 11630 lb (5280 kg) / Deep: 11840 lb (5370 kg) / Multi-shank: 11630 lb (5100 kg)
  • Large deep-heat-treated, sealed and lubricated track links and through-hardened, sealed and lubricated rollers for maximum wear resistance
  • Sealed and lubricated